Additional information
Weight | 7 oz |
---|---|
Dimensions | 5 × 5 × 5 in |
$28.99
Oak and Walnut Enclosure B size
Interior dimensions 4.22 x 2.19 x 1″
Out of stock
Weight | 7 oz |
---|---|
Dimensions | 5 × 5 × 5 in |
Only logged in customers who have purchased this product may leave a review.
thierry dussurget
bonsoir vous livrer en France??
Gerald (verified owner) 5 out of 5
Bought a couple boxes from them and will definitely be back for more. Great service and craftsman ship. Nicely done!
jacob.a.long (verified owner) 4 out of 5
This is one fine looking box, made as precisely as wood allows by an accomplished woodworker. I’ve already started a fully mechanical triple battery mod with this. However I can’t give it 5 stars because I’ve run into several problems during the build, all can be traced back to the thickness of the walls. This has ALMOST the same dimensions as the hammond box popular for mod makers, but because the walls are thicker it’s a bit bigger on the outside, and mine in particular seemed to be a few mm smaller on the inside. In order to fit my battery sled I had to go to town on the inside of the lid and the walls inside the enclosure with some very coarse sandpaper and a razor scraper. The top portion of the box was the worst, as I had to sand against the grain for an hour or more to have enough space to attach the negative contact on a pretty standard 22mm spring loaded 510. In the same order, I also got the squonk enclosure, which has much thinner walls (so no problems there). If this box had walls of the same width as the squonk box it would be ten times easier to build in. That said, it looks FANTASTIC with just some clear butcher block oil for a finish. The included magnets are great and the holes for them are just the right size to wedge in there. I used a bit of glue, but it was probably completely unnecessary.